• RP0169 - Control of External Corrosion on Underground or Submerged Metallic Piping Systems
• RP0170 - Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking during Shutdown of Refinery Equipment
• RP0472 - Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments
• RP0572 - Design, Installation, Operation, and Maintenance of Impressed Current Deep Groundbeds
• RP0273 - Handling and Proper Usage of Inhibited Oilfield Acids
• RP0274 - High-Voltage Electrical Inspection of Pipeline Coatings Prior to Installation
• RP0375 - Wax Coating Systems for Underground Piping Systems
• RP0475 - Selection of Metallic Materials to Be Used in All Phases of Water Handling for Injection into Oil-Bearing Formations
• RP0575 - Internal Cathodic Protection Systems in Oil-Treating Vessels
• RP0775 - Preparation and Installation of Corrosion Coupons and Interpretation of Test Data in Oilfield Operations
• RP0176 - Corrosion Control of Steel Fixed Offshore Platforms Associated with Petroleum Production
• RP0376 - Monolithic Organic Corrosion-Resistant Floor Surfaces
• RP0177 - Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems
• RP0178 - Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanksand Vessels to Be Lined for Immersion Service
• RP0180 - Cathodic Protection of Pulp and Paper Mill Effluent Clarifiers
• RP0181 - Liquid-Applied Internal Protective Coatings for Oilfield Production Equipment
• RP0281 - Method for Conducting Coating (Paint) Panel Evaluation Testing in Atmospheric Exposures
• RP0182 - Initial Conditioning of Cooling Water Equipment
• RP0184 - Repair of Lining Systems
• RP0185 - Extruded Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe
• RP0285 - Corrosion Control of Underground Storage Tank Systems by Cathodic Protection
• RP0186 - Application of Cathodic Protection for External Surfaces of Steel Well Casings
• RP0286 - Electrical Isolation of Cathodically Protected Pipelines
• RP0386 - Application of a Coating System to Interior Surfaces of Covered Steel Hopper Rail Cars in Plastic, Food, and Chemical Service
• RP0187 - Design Considerations for Corrosion Control of Reinforcing Steel in Concrete
• RP0287 - Field Measurement of Surface Profile of Abrasive Blast Cleaned Steel Surfaces Using a Replica Tape
• RP0387 - Metallurgical and Inspection Requirements for Cast Sacrificial Anodes for Offshore Applications
• RP0487 - Considerations in the Selection and Evaluation of Interim Petroleum-Based Coatings
• RP0188 - Discontinuity (Holiday) Testing of Protective Coatings
• RP0288 - Inspection of Linings on Steel and Concrete
• RP0388 - Impressed Current Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks
• RP0189 - On-Line Monitoring of Cooling Waters
• RP0190 - External Protective Coatings for Joints, Fittings, and Valves on Metallic Underground or Submerged Pipelines and Piping Systems
• RP0290 - Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures
• RP0390 - Maintenance and Rehabilitation Considerations for Corrosion Control of Existing Steel Reinforced Concrete Structures
• RP0490 - Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 ?m (10 to 30 mils)
• RP0590 - Recommended Practice for Prevention, Detection, and Correction of Deaerator Cracking
• RP0690 - Standard Format for Collection and Compilation of Data for Computerized Material Corrosion Resistance Database Input
• RP0191 - The Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories
• RP0291 - Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories
• RP0391 - Materials for the Handling and Storage of Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures
• RP0491 - Worksheet for the Selection of Oilfield Nonmetallic Seal Systems
• RP0591 - Coatings for Concrete Surfaces in Non-Immersion and Atmospheric Services
• RP0192 - Monitoring Corrosion in Oil and Gas Production with Iron Counts
• RP0292 - Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment
• RP0392 - Recovery and Repassivation after Low pH Excursions in Open Recirculating Cooling Water Systems
• RP0492 - Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes-
• RP0592 - Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service
• RP0692 - Application of a Coating System to Exterior Surfaces of Steel Rail Cars
• RP0792 - Standard Format for Computerized Close Interval Survey Data
• RP0892 - Linings over Concrete for Immersion Service
• RP0193 - External Cathodic Protection of On-Grade Metallic Storage Tank Bottoms
• RP0194 - Criteria and Test Methods for Cathodic Protection of Lead Sheath Cable
• RP0294 - Design, Fabrication, and Inspection of Tanks for the Storage of Concentrated Sulfuric Acid and Oleum at Ambient Temperatures
• RP0394 - Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating
• RP0195 - Recommended Practice for Corrosion Control of Sucker Rods by Chemical Treatment
• RP0295 - Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars
• RP0395 - Epoxy-Coated Steel Reinforcing Bars
• RP0495 - Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industries
• RP0196 - Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks
• RP0296 - Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H25 Environments
• RP0197 - Standard Format for Computerized Electrochemical Polarization Curve Data Files
• RP0297 - Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators
• RP0497 - Field Corrosion Evaluation Using Metallic Test Specimens
• RP0198 - The Control of Corrosion Under Thermal Insulation and Fireproofing Materials - A Systems Approach

NACE Test Methods

• TM0169 - Laboratory Corrosion Testing of Metals (similar to ASTM G31)
• TM0171 - Autoclave Corrosion Testing of Metals in High-Temperature Water
• TM0172 - Determining Corrosive Properties of Cargoes in Petroleum Product Pipelines
• TM0173 - Methods for Determining Quality of Subsurface Injection Water Using Membrane Filters
• TM0174 - Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials in Immersion Service
• TM0274 - Dynamic Corrosion Testing of Metals in High-Temperature Water
• TM0374 - Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Production Systems)
• TM0275 - Performance Testing of Steel and Reinforced Plastic Sucker Rods by the Mixed-String, Alternate-Rod Method
• TM0177 - Laboratory Testing of Metals for Resistance to Specific Forms of Environmental Cracking in H2S Environments
• TM0183 - Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment
• TM0184 - Accelerated Test Procedures for Screening Atmospheric Surface Coating Systems for Offshore Platforms and Equipment
• TM0284 - Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking
• TM0384 - Holiday Detection of Internal Tubular Coatings of Less Than 250 ?m (10 mils) Dry Film Thickness
• TM0185 - Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods by Autoclave Testing
• TM0186 - Holiday Detection of Internal Tubular Coatings of 250 to 760 ?m (10 to 30 mils) Dry Film Thickness
• TM0286 - Cooling Water Test Unit Incorporating Heat Transfer Surfaces
• TM0187 - Evaluating Elastomeric Materials in Sour Gas Environments-
• TM0190 - Impressed Current Test Method for Laboratory Testing of Aluminum Anodes
• TM0192 - Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments
• TM0193 - Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures below 930C (2000F)
• TM0194 - Field Monitoring of Bacterial Growth in Oilfield Systems
• TM0294 - Testing of Embeddable Anodes for Use in Cathodic Protection of Atmospherically Exposed Steel-Reinforced Concrete
• TMO196 - Chemical Resistance of Polymeric Materials by Periodic Evaluation
• TM0296 - Evaluating Elastomeric Materials in Sour Liquid Environments
• TM0197 - Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate and/or Strontium Sulfate from Solution (for Oil and Gas Production Systems)
• TM0297 - Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric Materials
• TM0397 - Screening Tests for Evaluating the Effectiveness of Gypsum Scale Removers
• TM0497 - Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems
• TM0198 - Slow Strain Rate Test Method for Screening Corrosion-Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service

Materials Requirements

• MR0174 - Recommendations for Selecting Inhibitors for Use as Sucker-Rod Thread Lubricants
• MR0274 - Material Requirements for Polyolefin Cold-Applied Tapes for Underground Submerged Pipeline Coatings
• MR0175 - Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment
• MR0176 - Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments

NACE/SSPC Standards

• NACE No. 1/SSPC-SP5 (RP0494) - White metal Blast Cleaning (blast cleaning abrasive to achieve a defined degree of cleaning of steel surface prior to the application of a protective coating or lining system)
• NACE No. 2/SSPC-SP10 (RP0594) - Near-White metal Blast Cleaning (blast cleaning abrasive to achieve a defined degree of cleaning of steel surface prior to the application of a protective coating or lining system)
• NACE No. 3/SSPC-SP6 (RP0694) - Commercial Blast Cleaning (blast cleaning abrasive to achieve a defined degree of cleaning of steel surface prior to the application of a protective coating or lining system)
• NACE No. 4/SSPC-SP7 (RP0794) - Brush-Off Blast Cleaning (blast cleaning abrasive to achieve a defined degree of cleaning of steel surface prior to the application of a protective coating or lining system)
• NACE No. 5/SSPC-SP12 (RP0595) - Surface Preparation and Cleaning of Steel and other Hard Materials by High and Ultrahigh-Pressure Water Jetting Prior to Recoating (replaces NACE RP0172)
• NACE No. 6ISSPC-SP13 (RP0397) - Surface Preparation of Concrete (preparation of concrete surfaces prior to the application of protective coating or lining systems)

NACE Emergency Guideline

• NACE EG2 - Protective Coatings for Carbon Steel and Austenitic Stainless Steel Surfaces Under Thermal Insulation and Cementitious Fireproofing (corrosion under insulation).